Fiberlasersystemer: Lasermaskiner til gravering af metal og mærkning af plast

Epilogs fiberlaserserie er din løsning til radering og mærkning af alle typer ubehandlet metal og plast. Print til laseren direkte fra din foretrukne grafiske software for let opsætning af jobbet, og radér et helt bord med dele på én gang.

  • Gravér direkte på de fleste metaller.
  • Mærk konstruktionsplast med dit logo.
  • Radér stregkoder, serienumre og billeder.

Epilog Fiber Laser Series Models

Three models to choose from to meet your material processing and production needs.

Epilog FiberMark 24: The FiberMark 24 is our original Fiber laser system featuring a large 24" x 12" engraving area. It is the first flying-optic fiber laser system to be introduced and has built its reputation for high-quality marks and robust mechanics.

Epilog Fusion M2 32: With the Fusion M2 32, we've designed our best performing laser ever. It can be configured with either a fiber laser source, CO2 source or both! It features a large 32" x 20" (812 x 502 mm) work area.

Epilog Fusion M2 40: With the Fusion M2 40, we've designed a system with an oversized work area with the best performing laser and motion control system ever. It can be configured with either a fiber laser source, CO2 source or both! It features a large 40" x 28" (1016 x 711 mm) work area.

Tekniske specifikationer for Epilog Fusion-serien

Epilog FiberMark 24 Epilog Fusion M2 32 Fiber Epilog Fusion M2 40 Fiber
Graveringsområde 24" x 12"
(610 x 305 mm)
32" x 20"
(812 x 508 mm)
40" x 28"
(1016 x 711 mm)
Focal Length (F-Theta Lens) 3" (76.2 mm) 3" (76.2 mm) 3" (76.2 mm)
Maksimumtykkelse for materialet 5" (127 mm) 12.5" (317 mm) 12.25" (311 mm)
Laserens watt-tal 30 eller 50 watt
Laser Type Solid State Pulsed Ytterbium Fiber Laser (air cooled).
Mode of Operation Pulsed 20-80 kHZ.
Repetition Rate (Frequency) 20 kHZ - 100 kHz depending on the laser wattage.
Intelligent hukommelseskapacitet Lagring af flere filer op til 64 MB. Med en rullende buffer kan filer af alle størrelser graveres. Lagring af flere filer op til 128 MB.
Air Assist Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface. Attach an air compressor to remove heat and combustible gases from the surface by directing a stream of air across the marking surface.
Laser Dashboard Laserens Dashboard™ styrer din Epilog Lasers indstillinger fra en række softwarepakker, fra design- og regnearksprogrammer til pakker med CAD-tegning.
Synlig rød prik Since the laser beam is invisible, the Red Dot Pointer on Epilog's Fiber Laser allows you to have a visual reference for locating where the laser will fire.
Flytbar start When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (FM Fusion) with the convenient Movable Home Position features on the FiberMark Laser.
Driftstilstande Raster, vector or combined modes.
Bevægelsesstyringssystem High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
X-akselejer Ground and polished stainless steel long-lasting bearing system. Self lubricating on the Fusion M2
Remme Advanced B-style Kevlar belts. Double-wide Kevlar (x-axis) and Steel Cord (y-axis) belts.
Opløsning User controlled from 75 to 1200 dpi
Hastigheds- og ydeevnestyring Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
Printoverflade 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
Størrelse (B x D x H) 34.5" x 24.5" x 16"
(876 x 622 x 406 mm)
52,5" x 33,75" x 40,75"
(1334 x 857 x 1035 mm)
37,75" (959 mm) dyb med udstødningsrum.
60.5" x 41.25" x 42.25"
(1537 x 1048 x 1073 mm))
43" (1092 mm) deep with exhaust plenum.
Vægt 120 lbs (55 kg)without stand 500 pund (227 kg)
Dobbelt kilde: 536 pund (243 kg)
643 pund (292 kg)
Dobbelt kilde: 679 pund (308 kg)
Elektriske krav Strømforsyningen skifter automatisk fra 110 til 240 volt, 50 eller 60 Hz, enfaset.
Maksimumbordvægt 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting. 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilationssystem External exhaust or internal filtration system is required via single 4" (101.6 mm) output port. External exhaust or internal filtration system is required via two 4" (101.6 mm) output ports.

Fiber Laser Series Videos

Watch videos about the creative laser applications available to owners of an Epilog Fiber laser system, and the wide range of materials the Epilog Fiber laser can engrave and mark.

Demonstration af FiberMark Fusion

Demonstrationsvideo af metalmærkning med FiberMark 24 og FiberMark Fusion

Se med, når Bob Henry viser, hvordan man bruger FiberMark og FiberMark Fusion.

Se nu

FiberMark 24 Demonstration

FiberMark 24 Metal Plastic Marking Demonstration

How can you use the FiberMark to mark metals?

Se nu

FiberMark Fusion Material Demo

FiberMark Fusion Materials demonstration

Watch as we demonstrated the FiberMark Fusion's material capabilities.

Se nu
  • 17-4 PH stainless steel
  • 303 stainless
  • 4043 steel
  • 6061 Aluminum
  • ABS (white/black)
  • Aluminum, 6061
  • Aluminum, yellow chromate
  • Bayer 2807 Makrolon polycarbonate
  • Bayers bayblend FR110
  • Black/white ABS
  • Black/white polycarbonate
  • Messing
  • Brushed aluminum
  • Carbon nanotube
  • Ceramics, metal-plated
  • Clear coat anodized aluminum
  • Cobalt chrome steel
  • Colored delrin (black/brown)
  • Compacted powder iron with phosphate coating
  • Kobber
  • DAP - Diallyl Phthalate
  • Delrin, colored (black/brown)
  • GE Plastics polycarbonate resin 121-R
  • Glass filled PEEK
  • Glass filled Teflon
  • Hard coat anodized aluminum
  • Inconel metals (various)
  • Machine tool steel
  • Magnesium
  • Metal-plated ceramics
  • Molybdenum
  • Nickel plated 1215 mild steel
  • Nickel plated brass
  • Nickel plated gold
  • Nickel plated Kovar
  • Nickel plated steel
  • Nylon
  • PEEK, white
  • Polybutylene Terephthalate
  • Polycarbonate (black/white)
  • Polycarbonate resin 121-R, GE Plastics
  • Polycarbonate, Bayer 2807 Makrolon
  • Polysulphone
  • Rynite PET
  • Santoprene
  • Silicon carbide
  • Silicon steel
  • Silicone wafers
  • Stainless steel 303
  • Stainless steel 17-4 PH
  • Steel 4043
  • Steel, machine tool
  • Various inconel metals (nickel-chromium super alloys)
  • White PEEK
  • Yellow chromate aluminum
  • Zinc plated mild steel
  • And Many More!

The source is a fiber laser: a fiber optic cable that has been doped with ytterbium, a rare earth element.

The fiber laser produces the same wavelength of light and the same marks. YAG lasers typically require cooling and more maintenance.

Yes, especially to the operator's eyes. Additionally the wavelength will pass through common Lexan or glass materials, which is why the viewing window has been impregnated with an organic compound that absorbs the fiber energy. Do not run the laser with the safety locks defeated.

The fiber laser pulls 8-10 amps on a 110-volt circuit, and 4-5 amps on a 220 volt circuit.

All metals can be engraved into with some depth; however, some metals are more amenable to depth engraving. Softer aluminum material will engrave with depth with only a few passes. The best way to test your material is with our Applications Lab.

The Fiber Laser can only cut through very thin gauge metals. We've had success at cutting up to 0.012" (.30 mm) thick metals.

Yes, by using the polished mark settings for bare metal, the black oxide color will be removed to expose the lighter native metal color.

Systems start below $35,000 (US price only) for a 20 watt system.

FiberMark 24: 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifting.

Fusion M2 32: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.

Let's find out! Fill out our request form to receive a brochure and samples. Or contact our Applications Lab to get started testing your materials.

  • FiberMark 24: 4" (101.6 mm)
  • Fusion M2 32: 7.5" (190.5 mm)
  • 3-Jaw Chuck Style Rotary: 6.5" (165.1 mm)

Få en brochure og vareprøver

Modtag brochurer og vareprøver, og få flere oplysninger fra os eller din lokale forhandler.

help desk software
Portions of this page translated by Google.