Technical specifications of our FiberMark 24 system. The FiberMark 24 is a legacy system of Epilog Laser. See specifications on this unit below.
| Graveringsområde | 24" x 12" (610 x 305 mm) |
| Focal Length (F-Theta Lens) | 3" (76.2 mm) |
| Maksimumtykkelse for materialet | 5" (127 mm) |
| Laserens watt-tal | 10, 20, 30 eller 50 watt |
| Laser Type | Solid State Pulsed Ytterbium Fiber Laser (air-cooled). |
| Mode of Operation | Pulsed 20-80 kHZ. |
| Repetition Rate (Frequency) | 20 kHZ - 100 kHz depending on the laser wattage. |
| Intelligent hukommelseskapacitet | Lagring af flere filer op til 64 MB. Med en rullende buffer kan filer af alle størrelser graveres. |
| Air Assist | Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface. |
| Laser Dashboard | Laserens Dashboard™ styrer din Epilog Lasers indstillinger fra en række softwarepakker, fra design- og regnearksprogrammer til pakker med CAD-tegning. |
| Synlig rød prik | Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire. |
| Flytbar start | When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position features on the FiberMark 24. |
| Driftstilstande | Raster, vector, or combined modes. |
| Bevægelsesstyringssystem | High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning. |
| X-akselejer | Ground and polished stainless steel long-lasting bearing system. |
| Remme | Advanced B-style Kevlar belts. |
| Opløsning | User controlled from 75 to 1200 dpi |
| Hastigheds- og ydeevnestyring | Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color. |
| Printoverflade | 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10. |
| Størrelse (B x D x H) | 34.5" x 24.5" x 16" (876 x 622 x 406 mm) |
| Vægt | 120 lbs (55 kg) without stand |
| Elektriske krav | Strømforsyningen skifter automatisk fra 110 til 240 volt, 50 eller 60 Hz, enfaset. |
| Maksimumbordvægt | 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting. |
| Ventilationssystem | External exhaust or internal filtration system is required via single 4" (101.6 mm) output port. |
Har du et spørgsmål, vi kan hjælpe dig med?
2019 © Epilog Laser. Alle rettigheder forbeholdes. Fortrolighedspolitik | Find forhandlere | Sitemap
