Engraving on a Wooden Napkin Ring

Uanset om du tilføjer de sidste detaljer i en ny restaurant eller måske er på udkig efter små gaver, som gæsterne kan tage med hjem fra et bryllup eller en anden særlig lejlighed, giver disse specialdesignede servietringe af træ stil og personlighed til enhver lejlighed.

Read on to learn the machine settings and other tips for engraving your very own wooden napkin rings. Pick from one of our styles or design something unique for customers to ensure their event is truly one of a kind.

Download nu

Laser engraved wooden napkin rings.

Vælg et af vores design, eller lav dit eget!

Place the napkin ring in the upper most left corner of the laser.

Igangværende graveringsproces.

Materialer, der skal bruges

Wooden napkin rings. We purchased ours through Amazon, but you may elect to find a wholesale supplier for bulk orders.
Epilog Laser-system

Vi brugte en 60-watt Helix med følgende indstillinger:

Raster: Hastighed 40 % // Effekt 100 % // DPI 600 // Standardgravering

Download the engraving files and adjust the artwork accordingly. A handy tip is to scan in your napkin ring and create a template for your engraving. You can use the Red Dot Pointer on your Epilog Laser to preview the area to make sure the napkin ring is perfectly positioned on your engraving table.

To Create the Napkin Ring Outline: Scan the napkin ring and bring it into your graphic design software. Create an outline around the napkin ring for the laser to follow using your software's pen tool. With the lid of your laser open and Red Dot Pointer turned on, send the vector outline to the laser and adjust your napkin ring's positioning on the engraving table.

This will give you a visual indicator of where the design will engrave - adjust the template accordingly for each napkin ring. When you're happy with the placement, send the raster job over.

Once you have modified the artwork to your liking, it's time to laser. Insert the napkin ring into the system and move to the upper left corner of the table.

Dernæst skal du køre vektoromridset (husk, at den synlige røde prik skal være slået til, og låget skal være åbent) for at sikre, at placeringen er, som du ønsker. Send jobbet til laseren, og tryk på start, når du er tilfreds.