Fusion Edge Laser Machines

Software/Firmware for Fusion Edge Laser Systems

Fusion Edge

Firmware & Driver Downloads

Tilmeld dig, så du modtager en meddelelse, når en ny driver eller firmware er tilgængelig til din lasermodel.

Tilmeld dig nu

Epilog Software Suite 2.2.9.0 (8/27/2021)

  • Alt, hvad du behøver for at bruge dit Fusion Edge-system
  • Installerer Epilog Job Manager og Epilog Laser Dashboard

Version 2.2.9.0 Produktbemærkninger

  • Adding new engravers to the Job Manager is more intuitive
  • Fejlrettelser og forbedringer

- For more information on the Job Manager, click here.
- Download Software Suite install and use instructions.
- For information on how to use the Construction Lines feature, click here

Bemærk: Fjern de tidligere versioner af Epilog Job Manager og Epilog Software Suite inden installationen. (Gå til Kontrolpanel > Programmer og funktioner, og fjern softwaren).

Download 64-bit (x64) version Download 32-bit (x86) version

Minimumskrav:

  • Windows 7, Windows 8.1 eller Windows 10
  • Operativsystemet skal have alle systemopdateringerne før installationen
  • Understøttelse af OpenGL 3.0 (eller derover) eller OpenGL 2.0ES (eller nyere)
  • 4 GB RAM eller mere
  • 2 processorkerner eller mere
  • Processoren kan være enhver Intel i3/i5/i7-, AMD Ryzen 3/5/7- eller AMD A4/A6/A8/A10/A12/FX
  • Integreret gigabit-ethernet kræves til Fusion M2 vision-systemet. Fusion Pro/Edge har ikke det samme krav, men er rart at have.

Anbefalede specifikationer:

  • 8 GB RAM eller mere
  • 4 processorkerner eller mere
  • Processoren kan være enhver Intel i5/i7-, AMD Ryzen 5/7- eller AMD A6/A8/A10/A12/FX

1.0.4.2 Firmware Downloads


1.0.4.2 (.SWU)
1.0.4.2 (.ZIP)

Firmware: 1.0.4.2 (9/9/2021)

Bemærk: After upgrading the Fusion Edge to 1.0.4.2, you cannot downgrade to a version below 1.0.4.0.

Download firmware 1.0.4.2 Download firmware 1.0.4.2 (.zip)


Læs installationsvejledningen

NEW FEATURES/ENHANCEMENTS

  1. Table can now be nudged when the machine is running. (New as of 1.0.3.6)
  2. Improved engraving quality of the Rotary Attachment. (New as of 1.0.3.6)
  3. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.3.6)
    • WiFi Capabilities
    • Job thumbnails at machine (requires newest Software Suite)
    • Edit job settings at the machine
    • Adjusted the Rotary Attachment’s park position for easier loading and unloading
  4. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.4.1)
    • Stack (Processing) Light
    • Ability to control the Air Assist from the Software Suite
    • Carriage camera for registration
  5. Improved vector speed and power compensation. (New as of 1.0.3.6)
  6. Power and Frequency can be modified while the job is running, dependent on job and laser type. (New as of 1.0.4.1)
  7. Added dynamic raster ramps for improved raster speeds and the ability to disable this feature in the settings menu. (New as of 1.0.4.1)

BUG FIXES:

Miscellaneous bug fixes and enhancements

FIRMWARE FAQ'S:

  • How do I know what firmware version I have?
    • If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.
  • How often will I receive firmware updates?
    • If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don't need to be updated in your machine if you are not experiencing issues.